|
E1
|
Water fill time out
The dishwasher has failed to fill with water in a reasonable time.
· Check water supply
· Check water inlet valve
· Check wiring to water inlet valve
· Check connections to water inlet valve
|
|
E2
|
Water drain time out
The dishwasher has failed to drain the water in a reasonable time.
· Check water drain or waste hose
· Check plumbing at drain point
· Check water drain pump
· Check wiring to water drain pump
· Check connections to water drain pump
|
|
E3
|
Water heating time out or fault
The dishwasher has failed to heat with water in a reasonable time or has failed to detect the water heating element.
· Check water heating element wiring
· Check water heating element
· Check wiring to main control module
|
|
E4
|
Anti flood device tripped
The dishwasher has detected a water leak through the anti flood device being activated.
· Check base of the dishwasher for any leaks
· Check resolve any leaking components
· Check wiring to anti flood device
|
|
E6
|
NTC open circuit detected
The dishwasher has detected an open circuit error with the temperature sensor or NTC.
· Check wiring to temperature sensor
· Check temperature sensor
· Check wiring control module
|
|
E7
|
NTC shorted error
The dishwasher has detected an short circuit error with the temperature sensor or NTC.
· Check wiring to temperature sensor
· Check temperature sensor
· Check wiring control module
|
βγάζει Ε30, μόνο Ε3 βλέπω στους κωδικούς για βλάβη
πρώτη φορά χρησιμοποιείται
μοντέλο;
δεν κανει επαφη το κουμπι του start με την μικρη εσωτερικη πλακετα εκινησης ενώ αναβει ολο το πρόγραμμα δεν κανει εκινηση αυτο
Κάλεσε ηλεκτρονικό να το επισκευάσει.