E1 Πλήρωση νερού εκτός χρόνου
Έλλειψη παροχής νερού μέσω της βρύσης ή ελαττωματική βαλβίδα εισαγωγής
E2 Αποστράγγιση νερού εκτός χρόνου
Μπλοκαρισμένη ή ελαττωματική αντλία αποστράγγισης
E3 Πρόβλημα αντίστασης ή του NTC
Ε4 Υπερφόρτωση
Αυτό μπορεί να οφείλεται σε λανθασμένη ταμπλέτα
E5 Δεν μπορεί να απενεργοποιηθεί
Πρόβλημα τάσης
E6 Ανοιχτό κύκλωμα θερμίστορ
E7 Βραχυκύκλωμα θερμίστορ – E1 Χρόνος πλήρωσης
E1 Filling time out
Ordinarily this would point towards a problem with the water supply system. That could be as simple as a lack of water supply through the tap being turned off to a faulty water inlet valve and so on.
E2 Drain timeout
This will almost certainly be either a blocked drain pump or a faulty drain pump.
E3 NTC or element fault
Essentially this fault code is telling you that there is a fault on the dishwashers heating circuit. This could mean a number of things and the only way to find out is to systematically check each component in the heating circuit for any failures.
E4 Overfilling
This can be caused by several things however the use of 3, 4, and 5-in-one tablets is strongly not recommended in these machines as on some programs it can lead to excessive foaming, especially if you also use salt in your dishwasher.
These dishwashers have a nasty habit of also leaking into the base due to this and it can cause a lot of damage to the dishwasher.
E5 Cannot switch off automatically
Voltage issue.
E6 Open circuit Thermistor
E7 Short cicuit thermistor E1 Filling time out
Ordinarily this would point towards a problem with the water supply system. That could be as simple as a lack of water supply through the tap being turned off to a faulty water inlet valve and so on.