AEG Lavamat ΜΟΝΤΕΛΑ ΠΡΙΝ ΤΟ 1997
|
C1
|
No water in, valve at fault or low pressure, slow fill – fill timeout error
|
|
C2
|
Pump blockage, pump open circuit, drain blockage – drain timeout
|
|
C3
|
Safety flood device operatedt
|
|
C7
|
Not heating
|
|
C8
|
NTC fault detected
|
|
C9
|
Motor or motor tacho fault
|
|
CA
|
MOS-FET transitor defective (Replace main module)
|
|
CD
|
Door interlock fault
|
|
CE
|
Water distributor fault, this machine has a small motor in the dispenser to select the compartment to fill through, this in turn operates a micro switch inside the dispenser
|
|
CF
|
EPROM fault Some of these faults are locked in and will return even if machine is disconnected; the only way to clear them is to run the test programme. Hold in prewash and soak button while turning rotary knob to gentle spin
|
